Toro Weed Wacker Fuel Oil Ratio
Toro Weed Wacker Fuel Oil Ratio Formula
It depends on the elevation you are running. Lower elevation= dence air. Factory settings are 2 1/2 turns out.
Start from there and go for a run take your sparkplug out and check the color. If its white then you are running too lean turn it 1/2 turn out until you run it and its brown in color.
If you take the sparkplug out and its wet you are too rich. Turn it in 1/2 a turn until brown. If you are asking about what ratio to mix 2 cycle fuel then if you are using a synthetic oil its 40:1 regular oil is 32:1. This is a trick question in that the correct fuel to oil mixture is not dependant upon the type of motorcycle. It IS dependant on the type of oil itself. Which is to say it's lubricating capability and other properties.
Toro Weed Wacker Parts
To achieve the proper ratio, one should always follow the recommendations and specifications put out by the oil manufac turer. For most of the new highly-concentrated synthetic pre-mix oils, that ratio is typically around 40:1. But, can go as high as 50:1 for some brands. If your style of riding, track and weather conditions, etc., lead to abnormally high engine teperatures or, if you particular motor tends to run unusually warm, it's best to err on the conservative side and mix at a slightly lower ratio than the manufacturer recommends. Never mix at a ratio that is higher than recommended. MrGlock2 group founder/moderator Yahoo.com YZ490.