In general I try to keep the installation on Mac OSx as simple as possible. And in general it's no more difficult compared to Windows. However some things might not be easy at the first time, so here comes an installation with screenshots for each step (mind I personally don't have a mac, so I took the screenshots from a remote computer running OS X 10.6.8 (Snow Leopard) and Basecamp v. This is a guide for Dummies, so it is quite long.

You will actually find all of this very easy I hope and keep in mind, this guide is written for people who never used Garmin format maps on their Mac. If you have experience with other maps, You will only need to read through Step 1, Step 2 and Step 5. However you might find the general information at the end useful too. Prerequisites: So as a prerequisite get Basecamp 4.6.3 from here - Note version 4.7.0 ships with broken MapInstall 4.2.0.

However MapInstall 4.2.0 can also update via other Garmin Tools!: Download from here: This should include, Garmin MapManager for Mac, and Garmin MapInstall for Mac. We need all three programs installed to continue. If they are not included in Basecamp download (seems to be the case lately) - get them from here: If I talk about right-click, I mean secondary click. If you don't know how to do that on your Mac, google it up - you miss out on many features without it in general. In general it is done by CTRL & Click if your mouse has no right click button. Step - Download - then Unarchive Maps: You will need Unarchiver (or any other unarchive program with support for lzma2!) to unarchive your downloaded maps, Get unarchiver here: During the setup, the settings page should popup, tick: '7-zip Archvie' - as shown below. During install, also make sure that under 'Extract archives to: Same folder as the archive' - Create a new folder for the extracted files: either 'Never' or 'Only if there is more than one top-level item' is selected.

Then just doubleclick on the mtbCOUNTRYmacosx.7z (in this example mtbtawainmacosx.7z). It will be extracted as mtbtaiwan.gmap. Step - Install the map: Double Click on the unarchived download. It is called mtbCOUNTRY.gmap (COUNTRY standing for the country you downloaded). Note on newer Mac OSx version doubleclick may not open MapManager - use right click instead - then select 'open with Garmin MapManager'. Now you will see MapManager pop up. Click on the blue button to continue.

You will see the mapname again Usually, but not always, once installed MapManager will popup - here you can see the full name of the map (in this case openmtbmaptaiwan) and on the right site the place where it is installed to - this place is /Users/YOURUSERNAME/Library/Application Support/Garmin/Maps/mtbtaiwan (taiwan in our example, germany would be mtbgermany, and so on). If we click on an entry, and then rightclick, we could uninstall a map from here. Also we can open the installation directory for any map from here - which is very useful and needed later on.

If it doesn't pop up, installation should have been successful too. Here you can see all your installed maps, and if you want to remove a map, open MapManager, right click on the map, and Remove/Uninstall it. In case of Problems: If on clicking on mtbCOUNTRY.gmap (COUNTRY is a placeholder here for the name of the country - e.g. Germany or Taiwan) the package is opened in Finder (or your File explorer) - instead of MapManager popping up here is what to do: First Try: Open Garmin MapManager, and find the mtbCOUNTRY.gmap folder you want to install - and open it from within Garmin MapManager!

(see Prerequisites about Garmin MapManager installation) Second Try: If installation from within Garmin MapManager should fail too (I don't know why it would) - you can move mtbCOUNTRY.gmap into the following folder: /Users/YOURUSERNAME/Library/Application Support/Garmin/Maps/ Alternatively you can install them to: /Library/Application Support/Garmin/Maps/ (top level - not inside your user folder). Both Locations are perfectly fine - but best only use one of them for all of your maps. If you have the same country map in both locations - you are asking for trouble. (also see the map manager Screenshot above - actually MapManager does nothing else than move the.gmap package (folder) for you - once it is placed there - it will be found by Basecamp). Delete Basecamp Cache If you open the map before it's fully installed - Basecamp may cache an empty map: to delete cache – clear: /Library/Caches/com.garmin.BaseCamp/TileCache being your home folder.

You can do this from Terminal using the command /bin/rm -r /Library/Caches/com.garmin.BaseCamp/TileCache/. 3.

Step: Use the map with Garmin Basecmap for Mac When you startup Garmin Basecamp for Mac, it will show you the last installed map (or the map you last used Basecamp with). In our case - this is the map of Taiwan. Now you can zoom in and work with the map just like any other map. If it's your first time, best play around a bit and read the manual if you're unsure. All maps support autorouting - I recommend you to use the 'routing-function'. It's the easiest and quickest way to create routes.

I recommend to set the profile to 'Car' (German Auto) or 'Bicycling' for best results - Read through here for understanding how the Openmtbmap works with and which avoidances you should activate/deactivate. here you can see a quick sample route. After planning wit the Routing-Function, you can finetune the route using the Select Function and drag it around like on Google Maps.

Garmin Nuvi 50lm Owner's Manual

If you want to switch between maps (this will only work if your have several maps installed) - make sure you got the MapSelector Tool in the Basecamp iconbar active, it is not active by default - here is how it looks - Globale Karte (third item from the left in the top list), you will have to get it from the toolbar menu with all items. I also recommend you to put the Routing-Function (here Routen-Funktion) from the very top right on the screenshot into your toolbuttons active all the time (I put it besides the map selector). You might also find the Track-Function very handy: 4. Step: Choose the layout of the Maps The Openmtbmap currently comes with 6 different Map Layouts - unluckily this is not as easy to choose on Mac. But I tried to make the selection as easy as possible.

Please read up which layout(s) best suit you here in the: or on the or First - Open the installation folder. The place of installation you can find out with Garmin MapManager. It should be: /Users/YOURUSERNAME/Library/Application Support/Garmin/Maps/mtbtaiwan.gmap (taiwan in our example, germany would be mtbgermany, and so on) - You can do so by Opening Garmin MapManager, and clicking onto 'Show in Finder' (here Im Finder anzeigen) Then rightclick on the map (in this case mtbtaiwan.gmap): and choose 'Show Package Content' - it should the third entry. In German on the example here it is 'Paketinhalt zeigen'. Now the Map Package will open (note, that in principle any map package is just a simple folder, but Garmin MapManager makes you see it as a so called package - with Finder alternatives like MuCommander you can just open the map package, without right-click): Here you see how the Mapinstallation folder looks like. In the 'Layout Files' section - the different map layouts are saved.

Open the folder Layout Files, then choose the desired Layout folder (e.g. ClassicLayout), go into it, and copy the typXX.TYP file. Go up again to the main folder (mtbtaiwan.gmap) and just paste it in, overwriting the old (in this case) typtw.TYP. Here is a quick overview about the folders inside LayoutFiles: a) Two folders to enable/disable showing the contourlines. 'Integrate Contourlines' with an Info.xml inside to enable the contourlines and 'RemoveContourlines with an Info.xml to disable the contourlines in the map. Just copy/paste the Info.xml from here to the main folder, i.e.

Mtbtaiwan.gmap and overwrite the Info.xml in there. By default the contourlines are active for all maps that have contourlines integrated and not in a separate download of course. B) The map layout folders with a.TYP file inside. ClassicLayout (typical openmtbmap layout - optimized for high contrast and lots of information),. EasyLayout (easy openmtbmap layout for mtbiking - for those who prefer a cleaner easier to understand map compared to classic layout).

HikingLayout,. ThinLayout (based on Classic but thinner lines),.

WideLayout (based on Classic but wider lines and streets). DekstopLayout - low contrast for working with Basecamp.

The Velomap has the following layouts right now:. DekstopLayout - low contrast for working with Basecamp. VeloLayout (typical velomap layout - optimized for high contrast and lots of information),.

RaceLayout (high contrast for race cycling, only paved ways and streets are shown prominently) So you copy the typXX.TYP and then paste it inot the main map folder - i.e mtbtaiwan.gmap, then you have the new layout activated. Note, you must no have Basecamp open at the same time, else the file is locked and cannot be overwritten! Here I'm copying typtw.TYP from the ClassicLayout. Now Going back up to 'mtbtaiwan.gmap' (or mtbCOUNTRY.gmap) and pasting the.TYP and finally confirming the overwriting - that's it. Once you've done it once, it's easy.

4b) Step: Delete Basecamp TileCache If you change the layout of the map - and the map was shown before alreay - Basecamp will have cached it - so you cannot see the new layout (except by moving out of the area/zoom setting of the cache). To do So delete the contents of: /Library/Caches/com.garmin.BaseCamp/TileCache ( being your Home Folder). You can do this from Terminal using the command /bin/rm -r /Library/Caches/com.garmin.BaseCamp/TileCache/. 5. Step: Send the Map to your GPS using Garmin MapInstall NOTE: on Old GPS all maps have to be sent at once. And can then be activated/deactivated via Menu on your GPS.

(old GPS e.g. Vista HCx, GpsMaps 60 CSx). On new generation GPS (e.g. Dakota, Oregon, edge 800, GpsMaps 62, Montana), you can send the maps one at a time as you like. Make sure you connected your Garmin, or put the memory card into a cardreader on your Mac (that is what I recommend on older devices - as they have very slow USB 1.1 connection so sending maps takes a long time). If not it will look like this - with the selector empty so you cannot continue: First a note - The SD-card needs to be formatted FAT32 with Master Boot Record: Now that everything is ready - here we go - open Garmin Mapinstall (you can find it in Basecamp on the bottom of the Maps Menu - or open it from your app drawer) or you can open Mapinstall it by right clicking on the memory card of the connected device - and then 'Install Maps on.'

: Watch out on Advanced/Partial Install of Maps: We choose the region not by left clicking into it, but by dragging the mouse over the region we want - while holding the left mouse button (else you miss the contourlines)! I selected a second map, by choosing another map on the MapSelector in the image above, and also choosing the region I want. Note that you shouldn't overload your GPS device with maps. I recommend max 2GB for old Garmin GPS, and 4-6 GB of Maps maximum for new generation Garmin GPS devices. Note also there is a limit of 2048 or 4096 maptiles depending on your GPS device. If you put too many maps onto it, then starting the device will be slow, and using the search function will be slow too.

Qqformac qq for android office for mac. Then I click on 'Send Maps' (Karten senden) and MapInstall asks for Confirmation - showing me what will be installed - which we confirm again: And we can go and have a coffe while the maps are sent (depends on the size of the map, how long it takes). Especially on older GPS - best send the maps to the micro-SD Card that you use with it, and put that micro-SD Card into a cardreader on your Mac, so it sends much faster (old Garmin GPS units only have USB 1.1) More Detailed instructions on sending maps can be found here: General information about he Openmtbmaps and using them Using the maps on your GPS Please read through the following three topics: and and Participate in Openstreetmap and help to make the maps better: The Openmtbmaps are based on Openstreetmap, hence you can help to improve the map data! Activating 2d view in Basecamp: The 3D view is confusing to many users, and slower than the 2D view - I advise you to switch to 2D view in general using Basecamp: 184 comments to Mac OSx – Openmtbmap Beginners Guide.

Hi, I just did download the mtbgreece map and all is visibile on Basecamp for MAC. Using Mapinstaller I have tried to install the map on my 276 but after the job is done it is not visibile on my 276. I have removed all other openmtb maps and did re-install all of them – all are visibile and selectable but the Greece one not. What is the issue? Btw Garmin Hotline told me not to use Mapinstall (not supported any more) but Garmin Express – obviously Garmin Express does not work with open maps;-). What should be the appropriate tool for it nowadays? Best regards Patrick.

Thanks indeed I have downloaded the Greece map in UC English. I have removed all openmtb maps and re-installed them but the problem is continuing with the Greece MAP. Are you saying the problem might be with Basecamp and Mapinstall to be downloaded? Where can I find a previous version of Mapinstall? Should it be part of Basecamp?

Indeed in 4.7 Mapinstall is not part of Basecamp. However strange that is it works with all opemmtb maps other than Greece. Ok, will try to downgrade Basecamp. Anyway I prefer to ride the bike than sitting in front of my computer;-).

The Watch Link functionality adds navigation to your wrist! Wirelessly pair a compatible Garmin navigator to any Garmin Connect IQ™ compatible smartwatch, then receive driver alerts on your watch. Also receive compass guidance to and from your parked car to your final destination.

Learn more at garmin.com/drive. The LiveTrack feature lets drivers share location data so friends can track your whereabouts using their mobile device. Visit garmin.com/drive for compatibility and details. Numerous miscellaneous bug fixes and improvements. 2.2 Sep 15, 2016.

TechConsumer, Needs improvement Update since last review. Have been a long-time user of multiple Garmin GPS units including automotive and aviation, now on my second motorcycle GPS. The application clearly lacks refinement, often losing it’s link with the GPS unit, requiring a restart to enable weather and traffic data link back to the GPS. Recent application updates have improved stability and connection with the smart phone link and the GPS. Continue to test with my Sena Bluetooth headset, model SMH10.

Stability with Bluetooth connection is not reliable. The GPS will pair however after multiple power cycles the unit falls back into a mode of attempting connection for the audio portion of the control. The audio feed from the GPS when working is distorted, the volume is over driven. The Sena can pair with the GPS in two modes as outlined in the user manual, have tested both. The problem is the GPS has the ability to control phone and audio playback, the controls forces the phone to stream audio through the GPS to the headset rather than allowing the GPS to be a remote control pad and allow the phone to stream audio directly to headset, this appears to be by design. The perfect scenario would be to have the ability to use the control applications on the GPS to manipulate phone and allow all phone audio to stream direct from the phone to the headset, and get some of the audio if desired from the GPS also to the headset. Developer Response, Hello TechConsumer and many thanks for your feedback.

We will consider improving those suggested areas. TechConsumer, Needs improvement Update since last review. Have been a long-time user of multiple Garmin GPS units including automotive and aviation, now on my second motorcycle GPS. The application clearly lacks refinement, often losing it’s link with the GPS unit, requiring a restart to enable weather and traffic data link back to the GPS. Recent application updates have improved stability and connection with the smart phone link and the GPS. Continue to test with my Sena Bluetooth headset, model SMH10. Stability with Bluetooth connection is not reliable.

The GPS will pair however after multiple power cycles the unit falls back into a mode of attempting connection for the audio portion of the control. The audio feed from the GPS when working is distorted, the volume is over driven. The Sena can pair with the GPS in two modes as outlined in the user manual, have tested both. The problem is the GPS has the ability to control phone and audio playback, the controls forces the phone to stream audio through the GPS to the headset rather than allowing the GPS to be a remote control pad and allow the phone to stream audio directly to headset, this appears to be by design.

The perfect scenario would be to have the ability to use the control applications on the GPS to manipulate phone and allow all phone audio to stream direct from the phone to the headset, and get some of the audio if desired from the GPS also to the headset. Developer Response, Hello TechConsumer and many thanks for your feedback. We will consider improving those suggested areas. Iphonerocks00, Garmin finally got it together Updated June 2018: After several years of this app being buggy and working only temporarily after needing to be unpaired and then repaired to your Garmin device, it is now working very well reliably every time with my iPhone. I have submitted many tickets and Bluetooth logs to Garmin in hopes of getting this fixed and I am so pleased that it is now working well please keep it that way and don’t mess it up. This is a must-have for any Garmin compatible device user!

The coverage is much greater than FM reception areas which are limited to only urban cities. I get coverage with this well outside of the city boundaries. Other features such as local parking and traffic cameras are a big plus also.

Yay for Garmin getting this fixed in June 2018. I only wish it would launch automatically on the phone when you get in the car. Developer Response, Hello and many thanks for your feedback.

We are constantly improving our app so please stay tuned for the following versions too. For any other issue or suggestions please feel free to contact us at smartphonelink@garmin.com and we'll gladly assist you on solving it. Iphonerocks00, Garmin finally got it together Updated June 2018: After several years of this app being buggy and working only temporarily after needing to be unpaired and then repaired to your Garmin device, it is now working very well reliably every time with my iPhone.

I have submitted many tickets and Bluetooth logs to Garmin in hopes of getting this fixed and I am so pleased that it is now working well please keep it that way and don’t mess it up. This is a must-have for any Garmin compatible device user!

The coverage is much greater than FM reception areas which are limited to only urban cities. I get coverage with this well outside of the city boundaries.

Other features such as local parking and traffic cameras are a big plus also. Yay for Garmin getting this fixed in June 2018. I only wish it would launch automatically on the phone when you get in the car. Developer Response, Hello and many thanks for your feedback.

We are constantly improving our app so please stay tuned for the following versions too. For any other issue or suggestions please feel free to contact us at smartphonelink@garmin.com and we'll gladly assist you on solving it. BFasterling, So-so app, and Advanced Weather is a waste I downloaded this app to interface with my BMW Navigator VI. I do like the ability to automatically send a destination to the NAV VI when it connects to my iPhone.

I bought the Advanced Weather add-on for long road trips. The weather radar is slow, but functional as your planned route is also displayed. However, there are far better apps for weather radar.

The weather alerts are a nuisance. I get a banner and an alert tone which mutes everything else from the GPS but no really useful info. 'dense fog advisory', 'excessive heat warning', 'gale force winds', etc.

Pop up on the NAV VI with no indication as to WHERE. Selecting the banner or weather icon brings up the weather map on the NAV VI without any indication where the weather condition exists.

I've seen a flash flood area highlighted a few times, but that's it. I'm underwhelmed.

For an app that links up with a $950 GPS, I expect much better integration/performance. BFasterling, So-so app, and Advanced Weather is a waste I downloaded this app to interface with my BMW Navigator VI. I do like the ability to automatically send a destination to the NAV VI when it connects to my iPhone. I bought the Advanced Weather add-on for long road trips.

The weather radar is slow, but functional as your planned route is also displayed. However, there are far better apps for weather radar. The weather alerts are a nuisance. I get a banner and an alert tone which mutes everything else from the GPS but no really useful info. 'dense fog advisory', 'excessive heat warning', 'gale force winds', etc. Pop up on the NAV VI with no indication as to WHERE.

Selecting the banner or weather icon brings up the weather map on the NAV VI without any indication where the weather condition exists. I've seen a flash flood area highlighted a few times, but that's it. I'm underwhelmed. For an app that links up with a $950 GPS, I expect much better integration/performance.